Note: Jumper T18 Hall Sensor Gimbal Opentx radio is in US warehouse. We could only send to US based address.

The Jumper T18 brings the best features of the T16 series and upgraded the JP4IN1 module into JP5IN1 (2.4G JP4IN1 and 915mhz / 868mhz) . Jumper T18 radio also added adjustable LED back lights. What’s more, there are two power buttons, with this, you can turn off the radio quickly without waiting for a long time. Jumper T18 also has the 800*480 HD IPS touch screen interface reserved – expected to be supported by openTX2.4 and above.

Jumper is focusing on providing hardware compatible with various open source projects. They are always working on bring out better products. If you are looking for a radio can control long range without extra module attached to the radio—Jumper T 18 multi-protocol Opentx radio is your best choice.

Main Feature:
–JP5-in-1 Multi-protocol module included R9, DSM2/X, FrSKY, SFHSS, FlySky, FlySky AFHDS2A, Hubsan and more
–OpenTX firmware
–Voice function
–Zipper Case Included
–Adjustable LED Backlights
–Vibration reminder function
–USB-C online firmware upgrade
–JR/FrSKY compatible module bay on rear side.
–JP5IN1 module – 2.4G JP4IN1 and 915mhz / 868mhz
–6-Flight Mode Buttons (for APM and Pixhawk flight controllers)
–Support telemetry (depending on the receiver)
–Up to 16 channels of output (can be extended into 32ch, depending on the receiver)

Specifications:
Item Brand: Jumper
Item Model: Jumper T18
Size: 180*190*58mm
Faceplate: Carbon Fiber
Gimbal Type: Hall Sensor
Weight: 888g (without battery)
Working voltage: DC7-8.4V (NO CRSF)
Channels: up to 32 channels (depending on the receiver)
Display: IPS480*272 (800 * 480 HD IPS touch screen interface reserved – expected to be supported by openTX2.4 and above)
Simulator mode: 3.5mm standard ppm output or USB HID

Package Included:
– 1 x Jumper T18 OpenTX radio
– 1 x Zipper case
– 1 x USB-C cable
– 1 x Jumper orange neck strap